1.You can adjust the color of the light and the speed of color change through the remote control.
2.Reduce the computer temperature. Quiet and beautiful.
3.Switch various lighting modes through remote control.
4.Suitable for DIY Computer.
5.Controller Connecting with Power Supply . Support all computers
Application: Computer Case Fan
Compatible CPU: Intel / AMD
Power: 4.2 W
Bearing: Fluid Bearing
Fan Life: 30000 hrs
Fan Speed Control: 1400 RPM
Feature: RGB Support
Air Volume: 38CFM
Lines: 1 Lines
Power Interface: 6pin
Heatsink Material: Plastic
Fan Size: 120x120x25mm
1.Press this button to enter the playback mode (when turned on)
2.Press and hold the button to enter the RGB color switching sequence. Press OFF to save and exit after setting(In off state)
3.Press S to enter Light strip acceleration mode. Press S- to enter Light strip deceleration mode (when while playback is paused)
1.The fan speeds up. (During normal playback)
2.Light strip Speed up (when playback is paused) (press on first)
1.The fan speeds down. (During normal playback)
2.Light strip Speed down (when playback is paused) (press on first)
Featured Mode +(Play in fixed mode)
Featured Mode -(Play in fixed mode)
Shutdown button (automatic save after shutdown)
When the RGB colors do not correspond, the button of the Auto button will light after pressing the button for 2 to 3 seconds. Then press the red button and the color will be red. Then press OFF to save and exit, the corresponding will be correct after restarting
Press and hold the button for 2 to 3 seconds while the power is on. The light of the white button will turn white. Then press the Auto button again. It will be paired automatically. Restore to original code after power failure
All of Controllers supports Connecting with Power supply . Doesn’t need to connecting with Motherboard . if you just control the fan by Remote Contorl.